Unique elevator cabs were created using StoneLite® White Carrara and Rosso Laguna marble inlays.
| ||Project Name||Description||Location||Stone Used||Year||Categories|
The Ministry building adjacent to the Parliament was historically significant and needed to undergo restoration as the substrate was failing and the exterior façade was being held in place with surface fasteners. The goal was to maintain the Greenland marble on the exterior but replacing it with newly mined material was not an option as the quarry was closed in the 1920s.
The existing Greenland marble was removed from the exterior and shipped to Texas where it was fabricated into StoneLite® panels. Lightweight stone plugs were manufactured to insert into the holes created by the surface fasteners. Some corner panels required a fixed curved and were fabricated to a radius of 11’-1” and 7’-9”.
|23-24 NEWMAN ST.||
A multi-story exterior, column band, balcony fascias, and soffits project clad in 313 m2 of StoneLite® St. Hubert SLG and Texas Cordova Shellstone Limestone. The project scope was a retrofit and conversion of a 1970’s unsightly office building into 23 residential apartments with office accommodations on the ground floor.
The StoneLite® panels lightweight properties are a natural solution to architectural features where weight may be an issue.
The project won Best Housing (Large) in the AJ Retrofit Awards 2012 and a Blue Ribbon Award for Best Apartment.
When the Hyatt embarked on their renovation they selected StoneLite® Prairie Green granite in a high honed finish along with Impala Black granite in a flamed finish for portions of their exterior cladding Over 9,650 sq. ft. of StoneLite® panels were installed. The maximum panel size was 4’x8′ equaling about 144 lbs. per panel and allowed the installer to set 32 sq. ft. of stone in a matter of minutes using a boom basket.
|TEMPLE UNIVERSITY – Science, Education & Research Center (SERC)||
Temple University selected StoneLite® Cenia limestone panels to grace the exterior of their new seven story SERC building. More than 46,000 sq. ft. of StoneLite® panels were installed in an open joint, exterior rain screen application. In addition to the exterior flat panels SPI also manufactured the highly complicated and detailed stair components including the cap.
The architectural team was able to visit our manufacturing facility in Coppell, TX to view the panels and determine the placement of panels through an onsite lay down.
StoneLite® panels are used in unique applications. Starbucks used StoneLite® Absolute Black granite panels fabricated into sandblasted medallions.