Contact Us!

Our Projects Using St. Hubert SLG Limestone

View All Projects

  Project Name Description Location Stone Used Year Categories
23-24-Newman-St.-London-UK-limestone-02
23-24 NEWMAN ST.

A multi-story exterior, column band, balcony fascias, and soffits project clad in 313 m2 of StoneLite® St. Hubert SLG and Texas Cordova Shellstone Limestone. The project scope was a retrofit and conversion of a 1970’s unsightly office building  into 23 residential apartments with office accommodations on the ground floor.

The StoneLite® panels lightweight properties are a natural solution to architectural features where weight may be an issue.

The project won Best Housing (Large) in the AJ Retrofit Awards 2012 and a Blue Ribbon Award for Best Apartment.

2011
Multi-Story
81-Black-Prince-Rd.-London-UK-limestone-granite-01
81 Black Prince Rd.

Parliament House at 81 Black Prince Rd. is situated in the Albert Embankment with stunning vistas of the River Thames, Houses of Parliament and London Eye. The 23 story shared ownership residential tower was designed by award winning architect Keith Williams Architects and replaces a disused sixties office block. More than 3,250 m2 of StoneLite® St. Hubert SLG limestone and Impala Black honed and brushed granite was installed.

Telford Homes is the developer.

2014
Multi-Story
Featherstone-Street-London-England-UK-limestone-07
47-51 FEATHERSTONE ST.

A mixed use residential, office, and retail property that used over 1,200 m² of StoneLite® St. Hubert SLG  exterior limestone panels.  This project was part over clad and part new building with a two story roof extension.

2006
Multi-Story
WFSB-Rocky-Hill-CT-limestone-04
WFSB

News station WFSB 3 selected StoneLite® St. Hubert SLG limestone panels for more than 17,000 sq. ft. of  exterior cladding.

2007
Multi-Story
Andrews-Academy-St. Louis-MO-limestone-01
ANDREWS ACADEMY

More than 3,100 sq. ft. of StoneLite® St. Hubert SLG limestone was used to create the large cornice detail on this project. The cornice cantilevers from the facade creating a need for additional structure requirements if designed for dimensional stone. The weight reduction component makes StoneLite® the obvious choice. The StoneLite® system is able to fabricate and attach a very ornate or large cornice to the face of the building without additional structural requirements.

2008